Importance of quality and safety control of anti-smashing and anti-puncture safety shoes

In industrial production and life, there are requirements for dressing according to different production environments. For example, clean clothes are required to enter a clean room, and clean clothes are required to be worn in mold production, construction site construction, machinery manufacturing, and other places where punctures may occur.

Anti-smashing and anti-puncture work shoes can ensure that areas where production and construction are reliable also meet the standards of special construction safety shoes. Can these standards be implemented? It is related to whether the implementation of anti-smashing and anti-puncture work shoes is sufficient for the safety of production workers.

The work shoe industry standard requires that work shoes be placed on a testing machine to remove nails with a hardness greater than 60HRC. The testing machine is required to apply force on the protective boots until the protective boots penetrate. The requirements for different parts of stab-resistant work shoes are different. Test at least 4 points on the protective shoes. The positions of these four points are also clearly defined. How to implement the industry’s strict test standards and whether production workers can wear work shoes that pass the standard test is an important issue.

Generally speaking, the state establishes the nature of the business at the beginning of the establishment of a working shoe factory for qualification review and corresponding requirements, and is established after filing. The local industrial and commercial production management department will conduct professional tests on the products on a regular basis. Once the non-compliance rate is found to reach the non-compliance rate, the company will be punished heavily. Mass production of special work shoes requires reports for testing. To a certain extent, these measures have eliminated the opportunity for unscrupulous businessmen to produce from the heart.

The production quality control of anti-smashing and anti-puncture work shoes is the same as that of other labor insurance shoes. This is related to the lives of production personnel. In addition, strict control of technical materials and technologies provided by industry manufacturers can establish good industry discipline. Strict industry management to ensure that production workers are responsible and substitute for production.

Author: Nicole

Leave a Reply

Your email address will not be published. Required fields are marked *